Home > Products > Intelligent Factory Furniture Production Line Series Single Machine > Dust Sweeper with Air Compressed Blow and Brush Cleaning
Dust Sweeper with Air Compressed Blow and Brush Cleaning
  • Dust Sweeper with Air Compressed Blow and Brush CleaningDust Sweeper with Air Compressed Blow and Brush Cleaning
  • Dust Sweeper with Air Compressed Blow and Brush CleaningDust Sweeper with Air Compressed Blow and Brush Cleaning

Dust Sweeper with Air Compressed Blow and Brush Cleaning

Due to the large amount of dust in plate products, Dust Sweeper with Air Compressed Blow and Brush Cleaning can reduce the potential safety and environmental protection hazards to the workshop and even the environment. Dust Sweeper with Air Compressed Blow and Brush Cleaning can avoid the influence of foreign matters on the quality of the product surface and reduce the defective rate of the product caused by the foreign matters not being cleaned;

Send Inquiry

Product Description


1.Product Introduction


Dust Sweeper with Air Compressed Blow and Brush Cleaning with the most effective and convenient cleaning technology. It is suitable for all sections of furniture production automation line such as CNC Nesting section, CNC drilling section and etc. Dust Sweeper with Air Compressed Blow and Brush Cleaning can effectively solve the problem of large amount of dust or fiber particles caused by processing technology, such as cutting, slotting, drilling or engraving, which can save the loss for customers.


2. Product Parameter (Specification)


Rgv Rail Guided Vehicle

Model FQ-QS2
Appearance Size of Equipment 2120*450*450mm
Height adjustment range 0~180mm
Minimum passes through panel size 240*80mm*5mm
The working width of the roller conveyor is 1300 mm (as attached picture)  
Transporter construction width 1450mm
Maximum Machinable width 1450mm
The working height of the roller conveyor 950mm
Transverse brushing speed 95m/min
Motor power 0.5KW (WOSEN motor)
Requirements for central dust removal 20m/min
Working Pressure 0.6bar 0.4L/h
Brush belt dimension L3400*W40*D6*19/0.12*2SETS
Diameter of suction port 60mm*2 diameter 150*2
Maximum passing speed of 45m/min (for deep hole dust removal)  



3. Product Feature And Application

1.Patented Heavy Aluminum Material Used in the Whole Machine
2.Use wear-resisting and anti-static poly-amide brush for up to 2 years.
3.Self-made brush cleaning device to increase the adhesion of brush through micro humidifying device
4.Super stress beam with 8 silica gel wheels to prevent slab deviation
5.Random allocation of two sets of injection devices



4.Product Details





Hot Tags: Dust Sweeper with Air Compressed Blow and Brush Cleaning, China, Customized, Easy-maintainable, Quality, Manufacturers, Suppliers, CE, 12 months warranty, Quotation

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.